FAQ

• Is it possible to fit a self-supporting run flat tyre on standard H2 rims? If so, will it still work as a run flat tyre and what are the implications?
  Yes it is possible, although Pirelli strongly recommend that EH2 rims are used because they guarantee improved retention of the tyre bead down to zero inflation pressure.
  In the event of run flat operation at zero pressure with H2 rims, provided that a Pirelli self-supporting run flat tyre is used in conjunction with a Tyre Pressure Monitoring System (TPMS) or air pressure warning system, the tyre will maintain its run flat characteristics. A TPMS is absolutely necessary to alert the driver that the tyre has lost pressure.
  
• Can standard tyres be fitted to EH2 rims? If so, will they work as a run flat tyre?
  Standard tyres can be fitted to EH2 rims but they will not have run flat.
  
• Are EH2 rims stronger then standard rims?
  EH2 rims have the same characteristics as standard rims. The only difference is the presence of extended humps.
  
• If one of my run flat tyres sustains a puncture can I replace it with a standard tyre?
  Pirelli do not recommend mixing run flat tyres and standard tyres on the same vehicle, even if paired in axle sets. If you have a puncture, the run flat tyres are designed to permit you to arrive at a tyre dealer where you can have the tyre checked and replaced if necessary with another run flat tyre. In exceptional and emergency circumstances a normal tyre with identical dimensions, load index and speed code can be fitted for a very limited period and distance. It must be noted that standard tyres do not have run flat characteristics as the other tyres on your vehicle and must be removed at the earliest opportunity.
  
• Can I mix Pirelli self-supporting run flat tyres with another brand of run flat tyre?
  Yes, but Pirelli recommends that in a run flat condition you should not exceed 80km (50 miles) at a maximum speed of 80km/h (50 mph). Pirelli strongly recommends that the different tyre brands should be fitted in axle sets and the tyre pressure monitoring system must be controlled to make sure that the pressure settings are compatible.
  
• Can I fit self-supporting run flat tyres on my car?
  Run Flat tyres have been developed based on the specifications of the vehicles on which they are mounted. Accordingly, Run Flat tyres may only be mounted on vehicles specifically manufactured to accommodate Run Flat tyres, therefore you must contact the vehicle manufacturer if you are in doubt.
  
• What inflation pressure should I use for a run flat tyre?
  For tyre pressures, always refer to the car owners manual or handbook for the manufacturers recommendation.
  
• Are all tyre dealers able to fit self-supporting run flat tyres?
  All those dealers already used to fitting/removing ultra low section tyres should be able to fit self-supporting run flat tyres.
  
• Can I repair a punctured Pirelli self-supporting run flat tyre?
  No, for safety reasons, Pirelli chooses not to recommend the repair of self-supporting run flat tyres. A self-supporting run flat tyre should always be changed and not repaired after a loss of pressure because it is not always possible to establish the time and conditions under which the tyre has been used with insufficient inflation pressure.
  
• How often should I check tyre pressure on self-supporting run flat tyres?
  Pirelli suggests that you check your tyre pressure at least every two weeks, as with standard tyres.
  
• Can I use nitrogen instead of air to inflate my self-supporting run flat tyres?
  Yes.
  
• Is it possible to extend the 80km (50 miles) tyre range of a punctured run flat tyre by re-inflating the tyre?
  No. After a puncture you can only travel 80km (50 miles) at a maximum speed of 80km/h (50mph), following which the tyre must be replaced.
  
• Can I use a pre-puncture sealant in my self-supporting run flat tyres?
  Pirelli do not recommend the use of pre-puncture sealants.
  
• Do self-supporting run flat tyres cause any loss of comfort or other performance when compared with standard tyres (handling, mileage, etc.)?
  Pirelli self-supporting run flat tyres provide comparable mileage and handling performance with little or no loss of comfort but with the exceptional added safety value of a run flat tyre.
  
• What is the effect on performance when my self-supporting run flat tyres are used in run flat conditions?
  Provided the vehicle is operated within restricted run flat speed of 80km/h (50 mph), handling is only slightly impaired due to reduced cornering force. Aquaplaning and braking remain almost the same. It is recommended that you avoid sharp driving manoeuvres if a tyre is completely deflated, especially if the tyres are fitted to H2 standard rims.
  
• Do self-supporting run flat tyres retain their run flat properties over time?
  If used correctly, Pirelli self-supporting run flat tyres maintain their characteristics for their entire life span.
  
• Is a Pirelli self-supporting run flat tyre a reinforced (extra load) tyre?
  No, not specifically as normally defined in the tyre industry. The tyre sidewall reinforcements are designed to provide run flat capability and are not used to define an increased load carrying capacity.
  
• In run flat conditions with a Pirelli self-supporting run flat tyre, can I drive for more than 80km (50 miles) if I drive slower than 80km/h (50 mph)?
  No. The maximum condition guaranteed by Pirelli is 80km (50 miles) at zero pressure at a speed not exceeding 80km/h (50mph). For vehicles fitted with Pirelli self-supporting Run Flat tyres as original equipment, the tyre manufacturer's recommendations indicated in the owners manual apply.
  
• How does a tyre pressure monitoring device work?
  There are a range of tyre pressure monitoring systems (TPMS) available so you should consult the vehicle manufacturer if you require a specific explanation. Basically there are two types of system, indirect systems use the fact that reduced air pressure causes the wheel to rotate at a slower speed and when they detect this difference send a warning to the driver. Direct systems, such as K-Pressure, directly control tyre pressure against pre-set values and send a warning when actual pressure falls below set values.
  
• How do I know if a tyre is self-supporting run flat?
  A Pirelli self-supporting run flat tyre can be identified by the RUN FLAT inscription which appears on the sidewall of the tyre. On tyres specifically homologated for BMW vehicles there are also the letters RSC which stand for Run Flat System Component.
  
• y vehicle handbook states that my run flat tyres can operate for 100miles (160km) but all Pirelli literature states 80km? Which is correct?
  Pirelli guarantee a general maximum distance of 80km for all self-supporting run flat tyres. Vehicle manufacturers conduct their own tests based on specific vehicle models, taking into consideration vehicle weight and characteristics and can decide together with the tyre manufacturer can suggest an increased distance for that specific vehicle. For vehicles fitted with Pirelli self-supporting Run Flat tyres as original equipment, the tyre manufacturer's recommendations indicated in the owners manual apply.